• News
  • Company news
  • Home > News > Company news
    How to Clean an Air Filter
    Click:1256 Date:2014-09-16 11:36:00 Information Source:

    Remove the filter from your vehicle. Inspect the filter to determine which side is the dirtiest. Make a small mark on the plastic edge of the dirtiest side. Lightly tap the filter against the edge of a trash bin to shake out the large particles of dirt. If you are unsure about how to remove the air filter in your specific vehicle, consult your owner's manual.

    Bring the  filter to a sink. Squirt  filter cleaning solution on the filter, and then run warm water over the filter. Continue running the water over the filter until the runoff is clear.

    Let the  filter dry for about 24 hours. Do not place it in direct sunlight and do not use unnatural heat, such as a hair dryer.

    Bring the filter back to the sink. Hold it over the sink and start oiling the filter. Squirt a line of S&B filter oil solution onto each filter pleat. Do this only on the side that you marked as the dirtiest. Let the filter sit for a few hours.

    Inspect the filter for areas that aren't properly oiled. These areas will be white, while the properly oiled areas will be off-white from the oil. If there are areas that require more oil, add a small bit oil the  filter oil solution.

    Re-insert the  filter into your car's filter compartment.