• Products
  • Product catalog
  • Filter Media
  • Home > Products > Filter Media
    Honeycomb based carbon particle filter
    • Honeycomb based carbon particle filter
    • Features
      Odor remove with good performance
      Low pressure drop, high air flow rate
      Long lasting time
      Easily to install
       
      External frame: aluminum alloy frame or beverage paper.
      Filter media: carbon granule
      Iodine value: 1050 or 950
      Usage environment: highest temp 80℃, humidity 80%

      Specifications:
      Material: Active carbon + PP HONEYCOMB + paper frame
      Odorous gases(benzene, methanol, etc) and vapors are attracted to and held by the unique properties of the activated carbon material.
      Removal of dust, pollens, mold spores, dust mites, bacteria and etc. 
      Solid particles captured are not released into the air again.
      Odorless nontoxic environment friendly

      Hepa air filter Application:
      Applied to the FFU, cleaning equipments , blow of the clearn room. And also be widely used in the electronic, semiconductor, hospital and food industry 
      Remark:
      Design and Material could be Selected according to customer's requirement
    More
    Synthetic fiber filter bag rolls
    • Synthetic fiber filter bag rolls
    • Bag filter media is made of multi-material. Three layers of filter media is hot melted by imported automatic welder. The first layer is coarse fiber filter cotton to arrest the major dust in air, thinner layer is the fiber filter paper to arrest the smaller dust, the outside layer as the strengthen protection layer. There is separated mesh to make the filter bag with even air flow, low resistance, high efficiency. The reasonable tri-layer design makes the products with excellent performance. The firm hot melting technic avoids the air pressure leakage. Separator mesh avoids the joint between bags and refine the air blow area in order to lower the resistance and maximize the dust holding capacity. Air blow temperature is above 85. Width is 0.6-0.75 m. Bag length is requested by customers.

      Structure:

       1)     Outer Scrim/PP non-woven
      A colour-coded scrim is the external final layer of the composite media. This high strength spun bond non-woven material provides strength integrity to the composite filter media. It's colour also provides a visual differentiation for different filtration efficiencies.  

      2)     Meltblown LayerA non-woven microfilter meltblown media layer is designed to filter the remaining sub-micron particulates after the needle punched media layer. This high efficiency mechanical filter media complements the needle punched media layer to effectively enhance a better overall filtration performance.  

      3)     Needle Punched Media Layer
      A needle punched media is designed to filter the mass of larger size airborne particulates in the airflow at a low initial resistance and with its depth filtration , it effectively enhances to increase a higher dust holding capacity.





    More
    Two layers filter material
    • Two layers filter material
    • Bag filter media is made of multi-material. Three layers of filter media is hot melted by imported automatic welder. The first layer is coarse fiber filter cotton to arrest the major dust in air, thinner layer is the fiber filter paper to arrest the smaller dust, the outside layer as the strengthen protection layer. There is separated mesh to make the filter bag with even air flow, low resistance, high efficiency. The reasonable tri-layer design makes the products with excellent performance. The firm hot melting technic avoids the air pressure leakage. Separator mesh avoids the joint between bags and refine the air blow area in order to lower the resistance and maximize the dust holding capacity. Air blow temperature is above 85. Width is 0.6-0.75 m. Bag length is requested by customers.

      Structure:

       1)     Outer Scrim/PP non-woven
      A colour-coded scrim is the external final layer of the composite media. This high strength spun bond non-woven material provides strength integrity to the composite filter media. It's colour also provides a visual differentiation for different filtration efficiencies.  

      2)     Meltblown LayerA non-woven microfilter meltblown media layer is designed to filter the remaining sub-micron particulates after the needle punched media layer. This high efficiency mechanical filter media complements the needle punched media layer to effectively enhance a better overall filtration performance.  

      3)     Needle Punched Media Layer
      A needle punched media is designed to filter the mass of larger size airborne particulates in the airflow at a low initial resistance and with its depth filtration , it effectively enhances to increase a higher dust holding capacity.





    More
    Bag filter rolls
    • Bag filter rolls
    • Bag filter media is made of multi-material. Three layers of filter media is hot melted by imported automatic welder. The first layer is coarse fiber filter cotton to arrest the major dust in air, thinner layer is the fiber filter paper to arrest the smaller dust, the outside layer as the strengthen protection layer. There is separated mesh to make the filter bag with even air flow, low resistance, high efficiency. The reasonable tri-layer design makes the products with excellent performance. The firm hot melting technic avoids the air pressure leakage. Separator mesh avoids the joint between bags and refine the air blow area in order to lower the resistance and maximize the dust holding capacity. Air blow temperature is above 85. Width is 0.6-0.75 m. Bag length is requested by customers.

      Structure:

       1)     Outer Scrim/PP non-woven
      A colour-coded scrim is the external final layer of the composite media. This high strength spun bond non-woven material provides strength integrity to the composite filter media. It's colour also provides a visual differentiation for different filtration efficiencies.  

      2)     Meltblown LayerA non-woven microfilter meltblown media layer is designed to filter the remaining sub-micron particulates after the needle punched media layer. This high efficiency mechanical filter media complements the needle punched media layer to effectively enhance a better overall filtration performance.  

      3)     Needle Punched Media Layer
      A needle punched media is designed to filter the mass of larger size airborne particulates in the airflow at a low initial resistance and with its depth filtration , it effectively enhances to increase a higher dust holding capacity.





    More
    Pocket filter rolls
    • Pocket filter rolls
    • Bag filter media is made of multi-material. Three layers of filter media is hot melted by imported automatic welder. The first layer is coarse fiber filter cotton to arrest the major dust in air, thinner layer is the fiber filter paper to arrest the smaller dust, the outside layer as the strengthen protection layer. There is separated mesh to make the filter bag with even air flow, low resistance, high efficiency. The reasonable tri-layer design makes the products with excellent performance. The firm hot melting technic avoids the air pressure leakage. Separator mesh avoids the joint between bags and refine the air blow area in order to lower the resistance and maximize the dust holding capacity. Air blow temperature is above 85℃. Width is 0.6-0.75 m. Bag length is requested by customers.

      Structure:

       1)     Outer Scrim/PP non-woven
      A colour-coded scrim is the external final layer of the composite media. This high strength spun bond non-woven material provides strength integrity to the composite filter media. It's colour also provides a visual differentiation for different filtration efficiencies.  

      2)     Meltblown LayerA non-woven microfilter meltblown media layer is designed to filter the remaining sub-micron particulates after the needle punched media layer. This high efficiency mechanical filter media complements the needle punched media layer to effectively enhance a better overall filtration performance.  

      3)     Needle Punched Media Layer
      A needle punched media is designed to filter the mass of larger size airborne particulates in the airflow at a low initial resistance and with its depth filtration , it effectively enhances to increase a higher dust holding capacity.





    More
    Medium synthetic pocket filter
    • Medium synthetic pocket filter
    • Bag filter media is made of multi-material. Three layers of filter media is hot melted by imported automatic welder. The first layer is coarse fiber filter cotton to arrest the major dust in air, thinner layer is the fiber filter paper to arrest the smaller dust, the outside layer as the strengthen protection layer. There is separated mesh to make the filter bag with even air flow, low resistance, high efficiency. The reasonable tri-layer design makes the products with excellent performance. The firm hot melting technic avoids the air pressure leakage. Separator mesh avoids the joint between bags and refine the air blow area in order to lower the resistance and maximize the dust holding capacity. Air blow temperature is above 85℃. Width is 0.6-0.75 m. Bag length is requested by customers.

      Structure:

       1)     Outer Scrim/PP non-woven
      A colour-coded scrim is the external final layer of the composite media. This high strength spun bond non-woven material provides strength integrity to the composite filter media. It's colour also provides a visual differentiation for different filtration efficiencies.  

      2)     Meltblown LayerA non-woven microfilter meltblown media layer is designed to filter the remaining sub-micron particulates after the needle punched media layer. This high efficiency mechanical filter media complements the needle punched media layer to effectively enhance a better overall filtration performance.  

      3)     Needle Punched Media Layer
      A needle punched media is designed to filter the mass of larger size airborne particulates in the airflow at a low initial resistance and with its depth filtration , it effectively enhances to increase a higher dust holding capacity.





    More
    nylon filter material
    • nylon filter material
    • Nylon filter mesh

      Nylon filter mesh is with features of good machine strength, high toughness, anti-aging, excellent machine anti-shaking, high chemical stability, organic solvent and fuel-proof, non-poison and harmlessness.

      Category: Nylon filter mesh can be classified as naslon mesh, polyamidefiberpa mesh and polyester mesh.

      Material: Nylon 1010, nylon 66, polyamidefiberpa and polyester

      Application: Used as filter mesh for industries, such as air-conditioner, pharmacy, chemical industry, paint, monosodium glutamate, fishing, food ect.

      Specification: 12 mesh/inch100mesh/inch


    More
    Nonwoven filter media for air filter bag
    • Nonwoven filter media for air filter bag
    • It is also named as plyester needle-punched felt with features of high porosity degree, good air permeability, high dust-collect efficiency, excellent resistance to tensile stress and long working life etc. The highest resistant temperature is up to 120 degree Celsius. Medium acid retardance, medium alkalinity and excellent Abrasion resisting property. Widely used in making of prefilter, medium efficiency filer and pocket filter,or used into fish pond

      Media: PP,it can coat glue or without glue

      Color: white or green and white

      Grammes per square metre: 100g/㎡~500g/ are available

      Width: 0.5m2.2m

      Thickness: 2-10mm

      Type: rolls or pieces for choice

      Density

      Thcikness

      Color

      Class

      Size

      140g/m2

      2-3mm

      white

      G2

      0.6mx50m,1.25mx50m

      160g/m2

      3mm

      white

      G3

      0.6mx50m,1.25mx50m

      220g/m2

      5mm

      white

      G4

      0.6mx50m,1.25mx50m

      240g/m2

      4-5mm

      White and green

      G4

      1.25mx50m




    More
    Fire retardant foam
    • Fire retardant foam
    • Sponge filter

      Sponge filter is frothed by polyester and aether with 97% of porous. Polyester sponge has the excellent performance of oil-proof and attrition-proof.

      Features:

      1. Rapid dust filtering, high dust filter efficiency.

      2. Low air pressure, excellent ventilation performance.

      3. Washable, effect will not be weakened after washing.

      Colors: Black, white, yellow, green etc.

      Aperture: 5-20PPI

      Remarks: Activated carbon, cold catalyst can be added on HS650 high efficiency sponge filter mesh in order to meet the multi-function of deodorization, anti-bacteria, sterilization upon request. Meanwhile, filter mesh with excellent flame resistance efficiency can be made according to requirements.


    More
    First    Previous    Next    Last   [1/6]